Dipole

RFID Antennas

RFID antennas to improve reading accuracy and range at every control point. We select and configure circular or linear RFID antennas, with short- or long-range performance, for warehouses, production lines, portals and picking areas. With the right coverage and polarization design, lost reads are reduced and performance is stabilised in environments with interference, metal or movement. Compatible with the leading RFID readers on the market and global standards, our RFID antennas help deliver more consistent and scalable traceability.

RFID Antenna Zebra AN510

Zebra's AN510 UHF RFID antenna is a product designed for installation in different industrial environments such as dock doors, conveyor belts, both indoors or outdoors. Its outer casing makes it discreet to install it indoors and highly resistant to install it outdoors, since the installation of this antenna is simplified with VESA studs so that it can be placed flush with the wall.

Some of the industries where this antenna is most used are retailers, factories, automotive, aviation, logistics and many others thanks to its great versatility.

Download datasheet double_arrow

Product description RFID Antenna Zebra AN510

The Zebra AN510 is an antenna for industrial use as it has IP67 sealing certification that perfectly isolates it from dusty and watery environments to be able to work in environments with a large number of particles in the environment without affecting its performance.

It has right circular polarization and SMA Female connection located on the side of the antenna, 68º opening angle, 1 dB axial ratio and 3 v maximum power.

Its dimensions are 25 cm x 25 cm x 1.1 cm and a total weight of 750 grams. The optimum operating temperature provided by the manufacturer is from -20C to +55 ºC.

Product code:

ETSI frequency: AN510-CSCL60004E (Vesa studded mount)

ETSI frequency: AN510-CFCL60002E (Flush mount)

UHF
SMA Male
3 Watts
68°
Right-hand Circular
8.5 dBi
IP67
UHF FCC 902-928 MHz, UHF ETSI 865-868 MHz
-25 °C to 55 °C / -13 °F to 161 °F
250mm × 250mm × 14mm
9.84in × 9.84in × 0.55in

You may also be interested in

Zebra Technologies AN520

RFID Antenna Zebra AN520

The Zebra AN520 has IP68 sealing certification to guarantee its correct operation in any type of installation, both indoors and outdoors, regardless of inclement weather or if there is a lot of dust in the environment. It uses ETSI: 865-868 MHz and FCC: 902-928 MHz frequencies and is right-hand circularly polarized. It has an SMA female connector on one side to be able to connect it to the reader. It has very compact dimensions of 15 cm x 15 cm x 1.4 cm and weighs only 250 grams. Its optimum operating temperature is from -40 ºC to +64 ºC. Product code: ETSI frequency: AN520-FCL60011EU (Flush mount) FCC frequency: AN520-FCL60010US (Flush mount)
See more double_arrow
Zebra Technologies AN650

RFID Antenna Zebra AN650

The AN650 Ground RFID Antenna is great for tracking RFID tags traveling through doors and other chokepoints. The ultra-low profile design means it fits in seamlessly in nearly any environment and provides the ability to be hidden under a mat or other covering. This antenna is just 8 mm thin and can withstand payloads of over 440 lbs. making it great for use cases such as conference/trade show attendee tracking, employee/people tracking, loyalty marketing, and race timing. Product code: ETSI: AN650-FCL71324EU
See more double_arrow
Zebra Technologies AN440

Antenna Zebra AN440

The Zebra AN440 is a robust antenna that has the IP67 seal that guarantees that its performance will not be affected in work environments where there is dust in the environment and it also has IEC-68-2-30 humidity certification that guarantees its resistance. for 24 h with up to 90% humidity. The frequency ranges used are 865 – 868 MHz for the European Union and 902 – 928 MHz for the USA. It has left circular polarization and right circular polarization and has a dual type N female connector on the back of the antenna. Code product: AN440-CPDFQ915WR
See more double_arrow
Zebra Technologies AN480

RFID Antenna AN480 Zebra

The Zebra AN480 RFID antenna is circularly polarized to the left or circular to the right with a N-type female connection with rear connection. It has an IP54 certificate for protection against dust and water particles to be able to install it in spaces where there are usually dusty situations and IEC-68-2-30 certification for humid environments. It has an opening angle of 65º, an axial ratio of 1.5 dB and a maximum power of 2 watts. The dimensions of this antenna are 25.91 cm x 25.91 cm x 13.2 cm and a weight of 1.13 kg and the optimum operating temperature is -25°C to +70°C. Product code: AN480 circular right: AN480-CR66100WR AN480 circular left: AN480-CL66100WR
See more double_arrow
Zebra Technologies AN610

RFID Antenna Zebra AN610

The Zebra AN610 is IP54 certified for environmental sealing so it can be used in conditions where there is a lot of dust in the environment without worrying that performance will be affected. It uses the 865 – 868 MHz UHF RFID frequency for the European Union and the: 902 – 928 MHz for the United States. It has a left-hand circular polarization and an N-type female connector. The body of this antenna is made of Kydex, a very resistant type of thermoplastic acrylic based on polyvinyl chloride to guarantee the long life of this product. It measures 27.5 cm x 21.4 cm x 1.2 cm and weighs 600 grams. The operating temperature specified by the manufacturer is -20ºC to +55ºC. Product code: ETSI frequency: AN610-SCL71128EU
See more double_arrow
Contact Dipole

Can we help you?

Find the RFID solution or product that meets your business needs. Ask us to help you make the right decision.

No results